Guides / Product photography
How to take product photos with your phone
You can take good product photos with a phone by using window light, a plain background, a steady phone, and the main camera at its normal 1x setting. Shoot beside a large window on a bright overcast day, fill most of the frame with the product, and photograph every item from the same angles. Editing does the rest.
- Shoot beside a window, with the room lights and the flash off
- Plain background, main 1x camera, phone held steady
- The same angles and crop for every product, then a light edit
What do I need to take product photos at home?
Very little, and most of it is already in the house:
- A phone from the last few years. Any recent iPhone or Android has a camera that is good enough.
- A window. The bigger the better, and ideally not in direct sun.
- A table you can push up beside it.
- A plain background. A large sheet of white paper or card from a stationery shop.
- Something white to bounce light. A sheet of foam board, a white tray, or a piece of card.
- A way to hold the phone still. A small tripod with a phone clamp is cheap. A stack of books works.
- A cloth. For the lens and for the product.
You do not need a light box, studio lights or a proper camera to start. Good light and a steady phone matter far more than equipment.
What is the best light for product photos?
Soft daylight from a window, coming from one side. It is free, it shows colours accurately, and it gives a gentle shadow that makes a product look solid.
Set the table so the window is to the left or right of the product, not behind you and not behind it. Then stand the white board on the opposite side, just out of frame, to bounce light back into the shadows. Move it closer and watch the dark side of the product lift.
Direct sun is the enemy: it gives hard shadows and blown-out highlights. If the sun is streaming in, hang a white sheet or baking paper over the window, or wait. A bright overcast day, of which New Zealand has plenty, is ideal. Light is usually most even in the middle of the day.
Turn off the room lights. Bulbs are a different colour from daylight, and mixing them leaves an orange or green cast that is hard to remove. Never use the phone's flash.
What background should I use?
Plain, and the same for every product. White or a soft off-white suits most things and is what shoppers expect from a catalogue.
Tape the top of a large sheet of paper to the wall or a box and let it curve down onto the table, so there is no line where the wall meets the surface. Put the product on the flat part, well forward of the curve.
Getting the background to come out properly white, and not grey, takes a little more care. We cover that in how to shoot white background product photos.
How should I set up the phone camera?
- Clean the lens. A smear from your pocket softens every photo. This fixes more blurry photos than anything else.
- Use the main camera at 1x. The ultra-wide lens bends the shape of a product, and pinch-zooming just crops and loses detail. If the product looks distorted, step back and use the 2x or 3x lens if your phone has a real one.
- Turn on the grid. It helps you keep the product level and centred.
- Tap the product to focus, then slide the brightness up a little if the white background looks grey.
- Lock focus and exposure by pressing and holding, so every shot in a set matches.
- Turn off flash, filters and portrait mode. Portrait mode blurs the edges of products in odd ways.
- Use a tripod and the timer, or the volume button, so pressing the shutter does not shake the phone.
- Shoot at the highest quality setting. You can always make a photo smaller later, but not bigger.
What angles should I shoot?
Enough that a customer does not have to guess. For most products:
- The hero shot. The whole product, front on or at a slight angle, on the plain background. This is the main image.
- A three-quarter view, showing the front and one side.
- The back or underside, especially if there are labels, ports or fastenings.
- A close-up of the texture, stitching, glaze or whatever shows quality.
- Scale. The product in a hand, on a table, or beside something familiar.
- In use. On a shelf, on a person, in a garden. This one can have a real setting behind it.
Google's shopping rules give a useful target for the main image: the product should fill between 75% and 90% of the frame. Leave a little space all round and no more.
How do I keep photos consistent across the whole range?
Consistency is what makes a store look professional, more than the quality of any single photo. A page of products shot at different angles on different backgrounds looks like a garage sale.
- Shoot everything in one session if you can, with the same window and the same time of day.
- Mark the table with tape where the product sits and where the tripod stands.
- Keep the same camera height and angle for each type of shot.
- Shoot the same list of angles in the same order for every product.
- Write the setup down, or photograph it, so you can repeat it when new stock arrives.
How should I edit the photos?
Lightly. Four adjustments cover most of it, and the editing tools built into your phone can do all four:
- Crop and straighten, so the product is centred and level. Use the same shape for every photo. Square is the safest.
- White balance, so white looks white and not blue or yellow.
- Brightness, raised until the background is clean but the product still has detail.
- A little contrast, if the photo looks flat.
Stop there. The photo has to show what the customer will receive. Under the Fair Trading Act, what you say about a product must be accurate, and a photo is part of what you say. Pushing the colours until a sage green jumper looks emerald will earn you returns and complaints. Check colours against the real product before you publish.
What size and file type should I save?
For most stores, a square JPEG around 2,000 pixels on each side. Each selling platform has its own limits, and our guide to product photo sizes for NZ online stores lists them for Shopify, Trade Me, Etsy and Google.
What are the most common mistakes?
- Mixed lighting. A window plus a ceiling light gives two colours on one product.
- A busy background. The kitchen bench, the carpet, the cat.
- Shooting from too close with the wide lens, which makes the nearest part of the product bulge.
- A dirty lens or a dusty product. Dust shows up far more in a photo than in real life.
- Different crops and angles from one product to the next.
- Heavy filters that change the colour.
- Only one photo. Shoppers cannot pick the item up, so the photos have to do it for them.
When is it worth getting help?
When the shooting is fine but the finishing is eating your evenings. Cutting products out cleanly, matching the background across fifty items and correcting colour is fiddly work, and it is where most do-it-yourself product photos fall short.
That part can be handed off. Our product photo editing takes your phone photos and returns them cut out, colour-corrected and on a matching background. For products that are hard to shoot at all, such as jewellery or glassware, see DIY vs professional product photography for when a photographer is worth it.